Development and improvement of rubber press machine with wrought pattern

Abstract

This continued 2nd year researchaims to study the development of the para rubber press machine with wrought pattern for continued 2nd-year. Used natural para rubber mixed in a Ta-kuong by normally practical para rubber farmer style to evaluate the rubber press machine. A machine consists of the 11 roller sets in vertical pathway with press sticks on top. The components are as follows: a water press roller with a slope surface to reduce the diameter around 1-1.5 mm from a center, the 3-pair sets of normal press rollers and the 2 duo sets of wrought pattern rubber press rollers with the induction motor at 1430 rpm. The rotating transmission based on belts and chains with a . The evaluated results produced the dried para rubber sheets thickness at 3.79 mm on average as the 2nd rubber sheet type standardin marketing need. From a top tray a farmer can put a sticky para rubber piece to a roller press machine easier than normal, just 5.9 second on average with lower hand power to handler of the rubber pieces. In finally, the wrought patternrubber sheets by a worker to carry the ta-kuong to a top tray of a rubber press machine and a rubber press man to put the para rubber pieces to a machine thus the completed 186 wrought rubber sheets per hour on average.